Skip to content

Orbi RBR20 Setup | Orbi AC2200 Setup

If you’re seeking out a device that could cover an area with as much as 2,000 square feet of rapid Wi-Fi then you may choose an Orbi RBR20 router. Once you install Orbi RBR20 correctly, you may experience a strong Wi-Fi speed in your home. Here are the complete instructions for the Netgear Orbi RBR20 setup.


Netgear Orbi RBR20 Configuration Steps

Here are complete instructions for Orbi RBR20 hardware setup

  • Turn off the modem and unplug it from the wall outlet.
  • Now plug your modem back into the wall outlet.
  • Take an Ethernet cable to connect your modem to the Orbi router.
  • Press the power button on your existing Orbi router.
  • Now check the light status on your Orbi router. It should be solid white.
  • Place your Orbi RBR20 satellite in the center of your home.
  • Connect the Orbi RBR20 satellite to the power outlet. 
  • Press the power button on the satellite.
  • Check the light status on your Orbi RBR20 satellite. It should be solid white after some time. 
  • Press the sync button on the backside of your Orbi RBR20 satellite.
  • Also, press the sync button on the backside of your Orbi router.
Orbi Setup for login

Two Different Ways to Setup Orbi RBR20(AC2200)

There are two different ways to login on to your Orbi network for setup. The first one is a wired setup and the other is a wireless setup. 

Orbi Router Wired Setup

  • First, confirm that your Orbi RBR20 is properly plugged into an electrical outlet.
  • Take an Ethernet cable and plug one end of the Ethernet cable into the LAN port of the router.
  • Now plug another end of the cable into the Ethernet port on your computer.
  • So, these are some steps to set up your Orbi RBR20 with wire.
Orbi Router Wired Configuration
Orbi RBR20 Setup

Orbi Router Wireless Setup

  • Ensure that your Orbi router and Orbi satellite are synced to each together.
  • Open your computer and go to the wireless network list and find the Orbi RBR20 network name and then try to connect it.
  • Now enter the default credentials of the Orbi RBR20.
  • By following these steps, you can easily do Orbi RBR20 wireless setup.  

Netgear Orbi RBR20 Login

Here are some basic steps to login into your Orbi RBR20(AC2200) web interface:

  • Open any web browser like google chrome, Firefox on your computer.
  • Now go to the Netgear Orbi setup web page.
  • Type the default Orbi login credentials and sign in to your network.
  • Now you’ve entered the Orbi admin panel and get control above the Orbi Wi-Fi.
  • Once carried out with the settings, hit the save button.
Login for Orbi Setup

Orbi AC2200 Setup Issues

Here are some Orbi RBR20 technical issues: 

  • Orbi RBR20 won’t connect.
  • Orbi login does not work.
  • Unable to access 
  • Orbi’s admin password is not working.
  • Failed to update firmware for Orbi RBR20.

Follow these steps to solve the issue:

  • Confirm that all cables are connected to the port.
  • If Orbilogin is not working in your browser, try different web browsers.
  • Ensure that your Orbi router and satellite are getting proper electricity from the wall outlet. 
  • Use the default IP address of your Orbi router instead of using Orbi login.
  • Clean all the caches, cookies, junk files, and history from your web browser.
  • Check your Orbi’s firmware version if it is not updated then update that first.

 If you are still confused about the Orbi RBR20 setup, contact our technical experts, and they will resolve your issue.