How to set up the Orbi RBR50 router?

The Netgear Orbi RBR50 router is classified as a wireless router because that helps you to connect various devices to your routers, such as wireless printers, smart televisions, and Wi-Fi-enabled smartphones. There is no need to worry if you do not know how to set up the Orbi RBR50, this article will completely assist you.

• The modem should be turned off and unplugged from the power outlet.
• Now reconnect your modem to the wall outlet.
• Connect your modem to the Orbi router with an Ethernet cable.
• Turn on you’re existing Orbi router by pressing the power button.
• Check your Orbi router’s light status now. It should be solid white
• Put your Orbi satellite in the center of your house.
• Turn on the satellite by pressing the power button.
•  Check the light status on your Orbi RBR50 satellite. After some time, it should be completely white
• Press the sync button on the backside of your Orbi RBR50 satellite.
• Similarly, press the sync button on the backside of your Orbi router.

There are two methods for connecting to your Orbi network for setup. The first is a wired setup, while the second is a wireless setup.

• First, make sure your Orbi RBR50 is plugged into a power outlet.
• Take an Ethernet cable and connect one end to the router’s LAN port.
• Now connect the other end of the cable to your computer’s Ethernet port.
• Open the network settings, and there are SSIDs mentioned on the back label of your Orbi router.
• Now Connect to that network using your Wifi-enabled computer.
• Launch a web browser and type orbilogin.com or default IP address 192.168.1.1 so that you can access the Orbi login page.
• Enter the default credentials of the device.
• Follow the onscreen instruction.

You can easily do Orbi RBR50 wired setup by following these steps.

Orbi router wireless connection

• Check that your Orbi router and satellite are both synced.
• Open your computer and connect to the wireless network.
• Find the Orbi RBR50 network in the network list. name, and then try to connect it.
• Now enter the default credentials of the Orbi device.
• Follow the onscreen instruction.

Netgear Orbi RBR50 login

Here are some basic steps to login into your Orbi web interface:

• Open any web browser like Google Chrome, or Firefox on your computer.
•  Now go to the Netgear Orbi setup web page.
•  type the default Orbi login credentials and sign in to yours.
•  now you’ve entered the Orbi admin panel and get control above the Orbi Wifi.
• Once carried out with the settings, hit the save button.

How do reset the Orbi RBR50 Wifi system to factory default settings?

To perform an Orbi reset, follow the steps in the correct order. There are several reasons why a reset is required because there are times when there is no other way out of an error or issue. So, follow the below-mentioned steps

• Press the Reset button with a paper clip or similar object. But first, confirm your Orbi router is turned on.
•  Wait until your Orbi device’s LED light blinks amber.  Now release the reset button.
• After that, turn off your router

Note-It is important to note that the device may take a few moments to reboot and power back on.

The steps outlined above will allow you to easily and quickly reset your device.

Conclusion

We hope you have carefully learned the Orbi RBR50 setup and reset. You will be able to fully utilize your device. Just in case you need some assistance or help with the setup or configuration. Contact our team of tech support experts, and their knowledge will be beneficial in completing your device setup course.